A Guide to Building a Rain Harvesting System

If you are looking for ways to be more eco-friendly, why not start to harvest the rainwater that falls on your property? Modern rain harvesting systems are unobtrusive and very effective, and if you would like to know more about this specialist field, here is a brief overview of the inner workings of a rain harvesting system.

  • Create a Plan – You will first need to look at your roof, as this is where you will catch the rainwater, and you will need the right type of wide guttering that runs into downpipes, which take the water to the storage tank. Ideally, you should use a steel water tank, and modern units have many layers of special film to keep the water fresh and insulated. The size of your tank would be determined by the amount of rainfall you can expect, and it is best to add a little when making this calculation.
  • Water Pump – Unless your water tank is elevated, you will need a suitably sized water pump to feed the various locations, and this would typically be housed under the ground, next to the water tank. It pays to buy the best quality equipment if you are serious about rainwater harvesting, as you want durability and reliability rolled into one.
  • Filters and Insect Screens – The filters perform a critical task by purifying the water as it makes its journey from your roof to the steel water tank, and these filters would be strategically placed and would vary in density. After the rainwater has passed through the filters, it would be pure enough to drink. The insect screens should cover any openings, preventing mosquitoes from laying their eggs in your water supply, and with adequate ventilation, your water supply should always be clean and ready for use.
  • Tank Top Up – It is wise to have a mains water connection that can be automatically turned on when the tank level drops to a specified point, and this ensures there is always a sufficient amount of water at your disposal. It would be nice if we could harvest all of our water from rainfall, but in most cases, we also need mains water.
  • Gutter Mesh – This is essential, as it captures most of the debris that collects in guttering, and with a series of attachments, by the time the rainwater reaches the storage tank, it is clean. If you are not so handy with your hands, you might want to call in the experts, and with online solutions, you can easily make contact with a supplier and installer of the latest rain harvesting systems.

Using rainwater is not only eco-friendly, it will also save you money, and with the right maintenance, your harvesting system will always provide you with essential water, whatever the time of year. Modern systems are designed around the property, and with expert advice, your water problems will soon be a thing of the past.